Date:         Sat, 14 Jul 2018 21:20:30 -0400
Reply-To:     Andrew Berg <andrew@BERGWEB.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Berg <andrew@BERGWEB.CA>
Subject:      Re: Gas Heater Fuel Connection
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <MWHPR20MB1551069825C419AAC401A0A7A05E0@MWHPR20MB1551.namprd20.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"

Do you need to add another filter for the gas heater then?

Andrew



On Sat, Jul 14, 2018, at 9:16 PM, Dennis Haynes wrote:
> You need to get an appropriate tee and keep the connection before the
> pump. The return should work if you stay close to the tank. The
> pressure increase there may still be enough to push fuel through the
> heater metering pump when not in use or at least throw off the mtered
> delivery.>


> Dennis


>


> Sent from my Windows 10 phone


>


> *From: *Andrew Berg[1] *Sent: *Saturday, July 14, 2018 9:02 PM *To:
> *vanagon@GERRY.VANAGON.COM *Subject: *Gas Heater Fuel Connection>


>
> On my 84 camper, the tee fitting for the fuel line is immediately
> after the box filter upstream of the fuel pump. I plan to lose the box
> filter and upgrade to the larger Bosch post filter. Where should I
> locate the gas heater tee? After the post filter or on the return side
> of the gas tank? Where did VW tie in for 86 and later Van's?
>
>  Andrew>


Links:

  1. mailto:andrew@BERGWEB.CA