Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (August 2018, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 7 Aug 2018 19:21:05 -0500
Reply-To:     "Jim. Felder" <jim.felder@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Jim. Felder" <jim.felder@GMAIL.COM>
Subject:      Re: New water tank outlet
Comments: To: Marc Perdue <mcperdue@gmail.com>
In-Reply-To:  <CAEwp_cQL5bRONqLd6-5yh7nWctO2uV3cCqkwjcOyPAamiG-x_A@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

You know, al camping stores sell a plastic hose attachment for this purpose that fits nicely into the westy outlet, and it has a cutoff valve built into it.

Jim

On Tue, Aug 7, 2018 at 6:09 PM Marc Perdue <mcperdue@gmail.com> wrote:

> I wasn't going to use a custom nozzle. I tried my old standby pistol type > which I've always used, very inefficiently I might add. It didn't work > because of the rubber flap in the new design. With the straight, rubber > covered nozzle, which fit nicely into the hole, I got most of the water > actually in the tank and not all over me. So, you don't NEED a new nozzle, > but it works better. > > Fun times! > Marc > > On Tue, Aug 7, 2018 at 4:32 PM, Jeff Palmer <w.jeff.palmer@icloud.com> > wrote: > > > That’s crazy. Who knew I needed a custom nozzle for this. The new outlet > > is different from my old one that came with the van. I didn’t have this > > problem in the past. > > > > Thanks for the tips Marc! > > Jeff > > > > Sent from my iPhone > > > > On Aug 7, 2018, at 2:28 PM, Marc Perdue <mcperdue@gmail.com> wrote: > > > > Jeff, > > > > I've installed it. I dug through my box of hose sprayers to find just the > > right one for filling. It's long enough and narrow enough to fit in the > > opening and push through that rubber flap. If the pressure causes a > backup, > > that water comes back out through the little overflow tube on top. I > added > > a quick-disconnect ball valve before the sprayer head to better control > the > > flow of water. It worked a lot better than anything I've ever tried > before > > with the old outlet. > > > > It looked sort of like the one here: > > > https://smile.amazon.com/Touch-Rich-Ultimate-Nozzle-Adjustable-Rubber/dp/ > > B0777K5KYT/ref=sr_1_3_sspa?s=lawn-garden&ie=UTF8&qid= > > 1533669909&sr=1-3-spons&keywords=brass+hose+nozzle&psc=1 > > The rubber part helped it seal in the opening. > > > > Good luck! > > Marc Perdue > > > > On Mon, Aug 6, 2018 at 4:46 PM, Jeff Palmer <w.jeff.palmer@icloud.com> > > wrote: > > > >> Anyone ever install a new Delta 6 style outlet for the fresh water tank? > >> Mine is filling super slow. There is a rubber flap at the base - would > it > >> help to remove it? Not sure what it’s supposed to prevent from entering. > >> > >> Thanks > >> Jeff > >> Sent from my iPhone > > > > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.