I don’t see “I changed the thermostat.” in your list. Betcha the thermostat is stuck open. > On Aug 8, 2018, at 4:52 PM, Dan N <dn92610@GMAIL.COM> wrote: > > hi all, > > please help with this issue if you could... > > I bought last year a '91 Syncro tintop, WBX 2.1 engine. When I got it the > temp. needle sits on the top of the white zone at running temp., rad. fan > working. I get it home, give it a good tune up and change the coolant temp > sensor too. Nope... the temp. needle is barely moving, now sits on the > bottom of the white zone. So I did this: > > - swap a good instrument cluster from a running van > - test the voltage at the sensor connector --> 10.5V > - ground the sensor connector --> the needle went to the top, red light > blinking > > *note: when I turn the key on the red light blinks for a few seconds and > stop (which is normal as in my other van)* > > put the original instrument cluster back --> no change > > now I am lost... the blue ribbon is in excellent condition, all the little > nuts back there are tight. > > errr... what am I missing here?... please help... thanks > > dan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.