Cluster ground comes through a pin on the harness plug. See Bentley, and check for any resistance to ground. You can carefully clean and adjust the connectors too, but I’m guessing it’s a bad ground at the star connector under the dash above the fuse panel. Stuart > On Aug 8, 2018, at 5:36 PM, Dan N <dn92610@GMAIL.COM> wrote: > > sorry... it was NOT better, same behavior as the original one.... > > thanks > >> On Wed, Aug 8, 2018 at 5:09 PM, OlRivrRat <OlRivrRat@comcast.net> wrote: >> >>> On 8 Aug , 2018, at 5:52 PM, Dan N wrote: >>> >>> - swap a good instrument cluster from a running van >> >> You didn't say if that was any better ~ >> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.