On Wed, Aug 22, 2018 at 3:48 AM, Mark Belanger <mbelanger@gmail.com> wrote: > Sorry. I should have been more clear. All the devices running off fuse 3 > are wired directly to the aux battery (with an inline 15A fuse protecting > them). > Ok -- inside lights, cigar lighter, radio, clock.
> As for measuring voltage off pin 30 on the switch, does it matter which > one? > Bentley only shows one 30 terminal (vs two on the older switch) but if there are two of them either one will do. If ok there, check 58 pin (gray/green) with switch on. If ok there, trouble has to be wire between there and fuse/relay panel pin A24. Diagram is on 97.211. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.