Is it a new core? Some of them were defective. Ken Wilford at vanagain.com On Wed, Aug 22, 2018, 11:17 AM thewestyman <zolo@foxinternet.net> wrote: > Hello to all, > > I would like to find out the best way to make the front heater core to > give me heat. > I suspect, the system is not bled properly and there is still some air in > there, since it is the highest part of the coolant system. > I know, there is that two hose on the right side after I have removed the > glove compartment and the middle piece. > I just don’t know which one to remove and what to do to make sure the air > is out. > Best regards to the members, > > Zoltan > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.