Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (August 2018, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 27 Aug 2018 14:57:05 -0700
Reply-To:     vw_van_fan_Mark <madvws@COX.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         vw_van_fan_Mark <madvws@COX.NET>
Subject:      Re: Everything peachy with vanagon.com foil replacement except...
Comments: To: "Jim. Felder" <jim.felder@GMAIL.COM>
In-Reply-To:  <ULEa1y02z08X5Fr01LEczG>
Content-Type: text/plain; charset=UTF-8; format=flowed

The test is when the unexpected flashing is occurring you pull the 42/43 coolant level warning relay out of it's socket. If the flashing stops, the problems isn't within the cluster. If the flashing continues, the problem is within the cluster.

Mark

Jim. Felder wrote: > (SPOILER AERT--I am not claiming that the foil replacement is bad, just > looking for advice) > > Installed the vanagon.com south Africa product. Everything fine, got my > turn signal indicators back immediately. No longer had to treat the > instrument cluster like a human brain to get it back in the van in working > order. Love the LED switchover. > > But... not long after the install, the temp LED came on and stayed on. This > happened about every four times the car is run, and when it happens, > required going into the hatch and pulling the connector out of the sensor, > then replacing. Good for another four drives or so. May come on upon > startup, may wait until I am on the road. > > Swapped out for a spare, new coolant level sensor. No luck. > Pulled the connector and shorted the pins. No luck. > Pulled the cluster, reset ll the T14 connector contacts. No luck. > Checked the ground. No luck. > Swapped the temp gauge with a known good one from a 1991. No luck (worth > noting that the gauge in the car had been re-capacitored by David B not so > many years ago, and had been working perfectly). > > ?? > > Contacted Vanagon.org, they are contacting the mfr. I am figuring the test > procedures they recommend are going to be above my pay grade. Any notion of > some practical tests that might localize the failure to something? > > Jim >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.