Date:         Wed, 3 Oct 2018 19:46:04 -0300
Reply-To:     Roy Nicholl <RNicholl@NBNET.NB.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Roy Nicholl <RNicholl@NBNET.NB.CA>
Subject:      Re: please help - bumper bolt
Comments: To: "ddbjorkman@verizon.net" <ddbjorkman@VERIZON.NET>
In-Reply-To:  <311636084.4329224.1538600607037@mail.yahoo.com>
Content-Type: text/plain; charset=us-ascii

I also do not think hardness should be an issue, but I would opt for stainless or hot-dipped galvanize hardware.


> On 03-Oct-2018, at 18:03, ddbjorkman@verizon.net <ddbjorkman@VERIZON.NET> wrote:
> 
> Hi Dan;Don't fret.  This is not a problem.  Not surprising that the bolts from your OEM bumper don't fit, its flat, as opposed to your nice new tube bumper.  If someone does not come up with the exact answer, measure the bolt hole (verniers would be nice, but a good eye and a ruler will work), estimate/measute the distance from where the bolt head goes to where it exits the frame.  Add washer (2) and nut length and a bit more.  Go to wherever you get hardware, buy the bolt and try it.  Don't be disappointed if it takes a couple of tries.  Usually hardware places don't have a problem switching incorrect bolts.  Hardness shouldn't be an issue, unless someone else chime in on that.
> Dave B.
> 
> -----Original Message-----
> From: Dan N <dn92610@GMAIL.COM>
> To: vanagon <vanagon@GERRY.VANAGON.COM>
> Sent: Wed, Oct 3, 2018 1:56 pm
> Subject: please help - bumper bolt
> 
> hi all,
> 
> does anyone has this steel tube style bumper? if you do could you please
> tell me what size of the bolts?
> 
> the pics of bumper and a bolt - the bolt is from OEM square style metal
> bumper and it doesn't fit in the tube bumper. The OEM bolt is a bit larger
> in diameter and has different thread.
> 
> https://www.thesamba.com/vw/forum/album_page.php?pic_id=1829844
> 
> https://www.thesamba.com/vw/forum/album_page.php?pic_id=1829845
> 
> thanks
> 
> dan