Date: Sun, 14 Oct 2018 22:27:42 -0300
Reply-To: Roy Nicholl <RNicholl@NBNET.NB.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Roy Nicholl <RNicholl@NBNET.NB.CA>
Subject: Re: wiper arm
In-Reply-To: <69560503.1040346.1539565419744@mail.yahoo.com>
Content-Type: text/plain; charset=utf-8
Dave:
It’ since been posted that Chris Camacho at uniwerksdesign.com <http://uniwerksdesign.com/> is printing a wing which serves as a replacement for he OEM one.
While it would still be an interesting project, it’s now going to be somewhat lower on my overflowing list ;-) .. unless, of course, the wing on the Hyena fails
> On 14-Oct-2018, at 22:03, ddbjorkman@verizon.net wrote:
>
> Hi Roy. Please keep me in that loop
>
> Dave B.
>
>
> -----Original Message-----
> From: Roy Nicholl <RNicholl@NBNET.NB.CA>
> To: vanagon <vanagon@GERRY.VANAGON.COM>
> Sent: Sat, Oct 13, 2018 9:56 pm
> Subject: Re: wiper arm
>
> I was just thinking the same.
>
> The Hyena just went in storage this morning … when I can get access to it, I could probably have it scanned and we could try printing one.
>
>
> > On 13-Oct-2018, at 22:52, quadrat <quadrat@COMCAST.NET <mailto:quadrat@COMCAST.NET>> wrote:
> >
> > Can someone print a wing?
> >
> >
> >
> >
> > Ron A.
> >
> >
> >
> >
> > Ron
> >
> >
> >
> >
> >
> >
> >
> > On Sat, Oct 13, 2018 at 6:25 PM -0700, "Roy Nicholl" <RNicholl@NBNET.NB.CA <mailto:RNicholl@NBNET.NB.CA>> wrote:
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I would have thought Felder Industries to have an aftermarket replacement “wing” :-(
> >
> > DaveB … might have to enquire with Bell Enterprises.
> >
> >> On 13-Oct-2018, at 21:58, Jim Felder wrote:
> >>
> >> I have driven Vanagons winged and wingless and can’t tell a bit of difference.
> >>
> >> Jim
> >>
> >> Sent from my iPhone
> >>
> >>> On Oct 13, 2018, at 6:53 PM, kenneth wilford wrote:
> >>>
> >>> Sorry, you will have to drink some Red Bull because that's the only way to
> >>> get the wings you seek. 😀
> >>>
> >>> Ken Wilford at vanagain.com
> >>>
> >>> On Sat, Oct 13, 2018, 7:17 PM ddbjorkman@verizon.net <mailto:ddbjorkman@verizon.net>
> >>> wrote:
> >>>
> >>>> Hi All;What gives? I need a new drivers side wiper arm, the one with the
> >>>> wing. I have checked out a few vendors, including my east coast vendors
> >>>> and also mid west, and I can't find one with the wing. Has it been found
> >>>> to be useless?? I think they work well. Anybody got an answer on this
> >>>> one? Also, any ideas on a long range antenna that fits correctly in the
> >>>> hole up front? I had one on a previous Westy that I believe was replaced
> >>>> by the original owner who used it as a control "tower" at a local grass
> >>>> field airport. BTW, both were lost when I got stuck in a "soft touch"
> >>>> automatic car wash. Soft touch. indeed.
> >>>> Dave B.
> >>>>
|