thanks, I haven't found the offset on the Jetta wheels... but from the pics, looks a bit less than the Vanagon... I did find that I'll need to bore the centers another 6 mm. the ones I found are $75 for 4, with tires .. On Wed, Oct 31, 2018, 12:31 PM Ben T <syncro@gmail.com> wrote: > What is the width and offset? 2009 is 5x112 with 57.1mm centerbore. That > won’t clear your 2wd front dustcaps. Go to 66.1-66.7mm. Ideal offset at 6” > is ET30. You can fudge a little on either side. > > Your old Porsche has a 5x130 bolt pattern. Unless your spacers from that > are the universal type with slotted holes, they will bolt straight on. > > > BenT > > > On Oct 31, 2018, at 10:55 AM, Don Hanson <dhanson928@GMAIL.COM> wrote: > > > > I found some 2009 steel Jetta 16s nearby. Looking at specs... I guess > > the center holes need enlarged about 6 mm. Maybe some spacers, too... I > > have a pile left from my p,-race car.. > > Any comments? > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.