You want to pull your headlight assembly off by removing the four phillips head screws that hold the mounting bracket to the van. This will allow both lights for the square headlight Vanagon to be removed as a unit. Unplug them as set it to the side. Now you can access your antenna lower section.
On Mon, Dec 3, 2018 at 4:22 PM ddbjorkman@verizon.net < ddbjorkman@verizon.net> wrote: > Hi Ken;I just looked at your video. What year Vanagon is that? Both you > and Eric Caron, who has an 85, said ir removes from below. The GoWesty > video, on a later Vanagon, said remove from top. My Vanagon is an 87and I > can not get it out of that hole behind the headlight. I am so confused. > Dave B. > > -----Original Message----- > From: kenneth wilford (Van-Again) <kenwilfy@comcast.net> > To: ddbjorkman <ddbjorkman@verizon.net> > Cc: Vanagon List <vanagon@gerry.vanagon.com> > Sent: Mon, Dec 3, 2018 3:59 pm > Subject: Re: Antenna replacement > > Have you taken a look at my video about this? > https://youtu.be/Aqn860kYl-Q > > On Mon, Dec 3, 2018 at 3:11 PM ddbjorkman@verizon.net < > ddbjorkman@verizon.net> wrote: > > That's what I am hoping for. I can break out the mini grinder and adjust > it. It would just be nice to have the correct size of the hole before I > start. > Dave B. > > -----Original Message----- > From: Stephen Grisanti <bike2vcu@yahoo.com> > To: ddbjorkman@verizon.net <ddbjorkman@VERIZON.NET> > Cc: vanagon <vanagon@GERRY.VANAGON.COM> > Sent: Mon, Dec 3, 2018 3:05 pm > Subject: Re: Antenna replacement > > It's been years since I replaced our '87's antenna and it came out without > issue. Sounds like that hole is too small but someone else will report with > measurements, no doubt. > > Stephen > > Mobile > > > On Dec 3, 2018, at 2:57 PM, ddbjorkman@verizon.net < > ddbjorkman@VERIZON.NET> wrote: > > > > Hi All;I am replacing the antenna on my '87 Westy. The antenna will not > pull out of the hole it is in. It's loose, will fall into the space below, > but won't come out the hole in the body. I am wondering if old body work > closed it up. the hole is 1.135" tall by .585" wide, both at largest > point. Is this hole too small?? > > Thanks;Dave B. > > > > -- > Thanks, > Ken Wilford > John 3:16 > www.vanagain.com >
-- Thanks, Ken Wilford John 3:16 www.vanagain.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.