Hi Zoltan. So when a good battery voltage is connected straight to the fuel pump it will spin (work) but the injectors do not spray when turning engine with starter motor? I'm not familiar with Digijet but my Digijet pro training manual shows a hall generator. At minimum, I'd disconnect, clean, connector terminals to hall generator and distributor and inspect wiring for cracks, damage. I don't know where negative ground(s) for that system are but they may need cleaning or repair. I can p-mail you a copy of the Digijet Pro Training manual. Neil.
On 3/28/19, thewestyman <zolo@foxinternet.net> wrote:
> Now, that I somehow managed to get spark, I noticed that the fuel pump is > not working. And even when I get it going from the battery, the injectors > are not spraying. > This is a 1.9 Digijet system.
-- Neil n VE7TBN 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8 VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.