you could squeeze the ECU harness and push the wiring along to get it to the engine bay.. or drill a small hole in the firewall, put in a rubber grommet and push the wire thru it I don't see any harm to route it externally, going on the side by side with the fuel line. On Mon, Apr 8, 2019 at 9:35 AM Steven Johnson <sjohnso2000@gmail.com> wrote: > Well Westy owners, I'm trying to see if I can get a reaview camera cable > from > under the bench area to the engine compartment. I've looked with > google/Samba and don't see anything that helps me. When I look at the > driver's side of the > rear engine compartment, I can see the electrical wire bundle going up to > the > A/C circuitry that resides behind the rear cabinetry. I'd really like to > use that > access but I don't want to push too hard on that bundle for fear of messing > that > up or making it too confined. > > Alternately, I can't find a pic of a good way to route through from either > the > Computer module or even the rear heater hoses. > > I'd like to hear suggestions from this group before making a decision. > I'd really > prefer not to route this externally. > > Thanks, > > Steven > 91 Westy > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.