Date:         Fri, 12 Apr 2019 10:52:42 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Rearview Camera Cable Routing
Comments: To: Steven Johnson <sjohnso2000@gmail.com>
In-Reply-To:  <CAGXJJtxZDV4xAjEfWS8fw8ArAG_pZcRTF3kxTWk4xpE4_JgiOA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

you got it... nice...

for those who want a rear view backup camera... some of them are wireless
...
I wonder if they as good as the wired ones?

On Fri, Apr 12, 2019 at 10:43 AM Steven Johnson <sjohnso2000@gmail.com>
wrote:

> Hi All,
>
> Well, my solution involved Dawn dish soap.    I lubed the electrical A/C
> bundle shield with the dish soap,
> taped up the plug tip and swabbed some dish soap on it as well and fairly
> easily passed it through the
> opening between the engine compartment and the bed area underneath the
> drivers side cabinet.   Glad
> I didn't have to drill another hole.    I tie wrapped the engine side to
> the fuel rail (not real tight) and left it
> for now.   I want to test it again to make sure the video feed is still
> good and not mangled.   The remaining
> other end of the cable is just sitting tie wrapped at the ceiling.   I'll
> route that after I've checked the video
> again.
>
> Thanks everyone for your valuable input!
>
> Steven
> 91 Westy
>
>