Date: Wed, 12 Jun 2019 08:10:55 -0700
Reply-To: Dan N <dn92610@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Dan N <dn92610@GMAIL.COM>
Subject: Re: BenT VW items
In-Reply-To: <CAFdLW6nRL41+i-jF8SeD7=BWEVrGvd1v2N1gXQ7uuaLpHYwL3A@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
additional infos. on the 1.25 rocker arms.
we got them installed with a preload 1.5 turn after contact. About 3k miles
later the lifters became noisy when the engine is warm.
Bring it to the mechanic, he inspect them and tell me this. The set of 1.25
rocker arms came with valve lash caps, after about 3K miles the valves lash
cap settle down and the preload became *LESS* than 1.5 turn. So... we
should give them 1.75 to 2.00 turn when after contact on preload to prevent
this. In conclusion the 1.75 or 2.00 preload will be 1.5 later.... It's not
a defect, it's normal, similar as you do a break in on a rebuilt engine.
dan
On Wed, Jun 12, 2019 at 7:51 AM Dan N <dn92610@gmail.com> wrote:
> ooppps...
>
> NO timing change required
>
> dan
>
> On Wed, Jun 12, 2019 at 7:50 AM Dan N <dn92610@gmail.com> wrote:
>
>> there's NO recommended spark plugs to use... but my preference is NGK
>> BP6ET (3 prongs plug) I use them on all my vans.
>>
>> I don't know the stock ratio... you have to ask Marco for that.
>>
>> dan
>>
>> On Wed, Jun 12, 2019 at 7:45 AM Pat Spragge <spraggepat@gmail.com> wrote:
>>
>>> A couple of questions...
>>>
>>> Regarding the injectors, is there a preferred spark plug to use? Is
>>> there any need to change timing from the standard setting?
>>>
>>> ...and the rockers, what is the stock ratio?
>>>
>>> Thx,
>>> Patrick
>>>
>>> > On Jun 11, 2019, at 9:46 PM, Dan N <dn92610@gmail.com> wrote:
>>> >
>>> > hi Dean,
>>> >
>>> > my observations here are subjective, some of us may agree, some not...
>>> so
>>> > take it as they are...
>>> > on our 2 vans, my son's 2WD tintop and my Syncro tintop, both 2,1
>>> WBX...
>>> > we installed Marco's fuel injectors on both..
>>> > - it was big improvement in responsiveness in acceleration on passing
>>> on
>>> > freeway at 55mph and up...
>>> >
>>> > we installed later on a set of 1,25 rocker arms from Marco on both
>>> > engines...
>>> > - it's even better... idle is smoother...
>>> > - we feel we have more HP
>>> > - requiring less downshift on uphill grades
>>> >
>>> > so... please take it as is... if you got a set and don't have the same
>>> > result... please don't blame me...
>>> >
>>> > I'd recommend the Marco's injectors first then later 1.25 rocker
>>> arms...
>>> >
>>> > regards
>>> >
>>> > dan
>>> >
>>> >> On Tue, Jun 11, 2019 at 8:57 PM OlRivrRat <OlRivrRat@comcast.net>
>>> wrote:
>>> >>
>>> >> Dan
>>> >>
>>> >> What do the Marco 1.25Rockers do for You ~
>>> >>
>>> >>> On 11 Jun , 2019, at 8:38 PM, Dan N wrote:
>>> >>>
>>> >>> I don't use FB... I am not sure if I posted or mentioned some of the
>>> >> items
>>> >>> I like... here's a recap:
>>> >>>
>>> >>> - stainless steel coolant hoses
>>> >>> - all the silicone hoses around the engine
>>> >>> - Marco fuels injectors
>>> >>> - Marco 1.25 rocker arms
>>> >>>
>>> >>> dan
>>> >>
>>>
>>
|