hi Alex, thanks for the tip... the link you sent do you know it's for the Left or the Right? (no side mention on the site) dan
On Sat, Jun 15, 2019 at 1:23 PM <alex@mevay.org> wrote: > With some of the same doubts you have, I installed the $28 one last fall: > > JP Group Dansk 1188103180, 251-837-502-A-M350 > > https://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=251-837-502-A-M350 > > So far, so good, but it's the passenger side so doesn't get as much use. > > One issue on installation: there was a stamped depression in the > sheet metal that the original didn't have. This resulted in the door > sheet metal bending into it when the upper mounting screw was > tightened. I don't know why they did this. I pulled it back out and > reinstalled with a washer or two in there to fill the gap, and was > then able to properly tighten it without bending anything. > > Alex > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.