Date:         Fri, 5 Jul 2019 07:12:14 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Great device for lubing cables
Comments: To: "Jim. Felder" <jim.felder@gmail.com>
In-Reply-To:  <CAFnDXk31DPGEq5ehmrw_1HkpQ_O06+GeMypRsHmWm9AtqG0f_Q@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

thanks Jim...
I got similar device long ago during my motorcycle time and forgot about
it... just order one...

dan

On Fri, Jul 5, 2019 at 7:00 AM Jim. Felder <jim.felder@gmail.com> wrote:

> Despite my attempts to make the throttle cable on my diesel westy butter
> smooth, I was still getting catches from time to time. Recently I recalled
> mention of the use of a motorcycle cable lubrication gadget--in my case the
> Motion Pro 08-0182 cable luber--and ordered one for less than $10 shipped
> on Amazon Crime.
>
> <
>
> https://www.amazon.com/Motion-Pro-08-0182-Cable-Luber/dp/B0012TYX9W/ref=sr_1_4?crid=34FUP1JXFE47X&keywords=motion+pro+cable+luber&qid=1562334983&s=gateway&sprefix=motion+pro%2Caps%2C142&sr=8-4
> >
>
> Once the luber is clamped onto the end of the cable, allowing the rubber
> core to seal off exit routes for the lubricant, you insert the nozzle tub
> of the lube spray can into a small port in the device. Spray away and you
> can hear the cable housing filling up. I used mine in a couple of places
> and only spilled out about two drops on the driveway.
>
> Jim
>