Date: Sun, 25 Aug 2019 15:02:28 -0700
Reply-To: David McNeely <davmcneely40@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: David McNeely <davmcneely40@GMAIL.COM>
Subject: Re: Evaporative Emission Canister? (re: Fuel Expansion Tank)
In-Reply-To: <1db7561f-b797-26ff-37f2-21aedceda116@sbw.org>
Content-Type: text/plain; charset="UTF-8"
Well, the grommet for the fuel line at the wall will only work if one
installs continuous fuel line (supply side) anyway. No connector, either
nippled or barbed, that way. There is so far as I can tell no reason not
to run continuous fuel line return side, as well, which is what I did when
I replaced all the fuel lines immediately after I got the van. The
question I have now is, since that has been ten years, do I need to replace
all the fuel lines again? This is for a 1991 Volkswagen Vanagon GL
Campmobile, original 2.1l engine.
On Sun, Aug 25, 2019 at 2:37 PM Steve Williams <sbw@sbw.org> wrote:
> On 8/25/2019 9:23 AM, Robert Keezer wrote:
> > You discovered what is probably the number one reason Vanagons burn-the
> > hose leak at the firewall fitting.
>
> No, sorry, let me clarify.
>
> The leak I saw was NOT due to the firewall fitting. That fitting on the
> pressurized fuel supply line from the fuel pump was long ago replaced
> with a metal fitting:
>
> https://mira.sbw.org/photos/20190825/IMG_20190825_134710618/
>
> https://www.vancafe.com/025133322A-p/025133322a.htm
>
> GoWesty suggests replacing that plastic fitting with a grommet instead
> of a metal fitting. I don't know which is better. Here's where they
> mention it:
>
> https://urlzr.mp/Unb (GoWesty)
>
> Rather, the leak I noted was on the return line, just forward of the
> firewall grommet, where it joins the plastic line. Here I have bent the
> rubber line to show the joint that was leaking, which is normally hidden
> from view:
>
> https://mira.sbw.org/photos/20190825/IMG_20190825_134932235/
>
> Both of those lines join the original plastic lines that run forward to
> the fuel pump and the fuel tank. It's those plastic lines I'm thinking
> of removing, so the rubber hoses will be continuous from the fuel pump
> to the firewall fitting (supply side) and from the fuel pressure
> regulator to the fuel tank (return side).
>
> GoWesty has a "Hard Plastic Fuel Line Replacement Kit":
>
> https://urlzr.mp/Tnb (GoWesty)
>
> But that page is confusing. I believe it includes more hard plastic
> line, together with barbed fittings to make the joint more secure. Why
> not run one continuous line, as I'm suggesting?
>
> More photos:
>
> https://mira.sbw.org/photos/20190825/
>
|