Date:         Sun, 1 Sep 2019 11:49:16 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: adjusting sliding door height
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BL0PR20MB2098185160969BB0777EDFC1A0BF0@BL0PR20MB2098.namprd20.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"

sorry forgot mentioning it's a '89 tintop...
the sliding door was misaligned front and back... so replaced all the
rollers, clean lube the tracks thinking it helps the alignment but it's
not... the door closes and opens much smoother and quieter but the
alignment is still off... and also front bottom roller assembly (the
aluminum piece w. 2 roller one vertical and one horizontal) rubs against
the frame near the end.

thanks

dan

On Sun, Sep 1, 2019 at 11:34 AM Dennis Haynes <d23haynes57@hotmail.com>
wrote:

> What year! Basically the front gets adjusted by the roller bracket at the
> bottom. The rear requires 2 adjustments. First is the roller assembly where
> it attached to the door and then there is the latching bolt in the rear
> door frame. Unless some parts have been replaced miss alignment indicates
> worn parts including the door tracks or the door frame is shifting.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Dan N
> Sent: Sunday, September 1, 2019 1:32 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: adjusting sliding door height
>
> hi all,
>
> does have a link on how to adjusted sliding door height front and rear?
> (beside the Bentley)... it's not aligned when closed (view from outside)
> thanks
>
> dan
>