Your 84 and 91 are virtually identical. You will probably have to remove both the cluster and the steering column cover to see the switches on the master cylinder.
Jim
> > On Sep 22, 2019 at 6:50 PM, <John H. Lauterbach (mailto:john@jhl.mgacoxmail.com)> wrote: > > > > My Vanagon is due back later this week for final parts to be replaced on braking > system. I noticed that I no longer have rear brake lights. Everything else on > the rear light clusters works so I suspect that the when the master cylinder was > replaced, the connection to the brake lights was not put on correctly. Is there > an easy way to get to the switch without taking the instrument cluster out? I > remember doing this on my '84, but on first try there does not appear a way on > the '91 to see the if the wires are connected correctly. Any help on this would > be most appreciated. > > Thank you, > > John > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.