Date:         Wed, 25 Sep 2019 23:45:00 -0400
Reply-To:     David Beierl <dbeierl@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@GMAIL.COM>
Subject:      Re: Removing front heater cover
Comments: To: Dan N <dn92610@gmail.com>
In-Reply-To:  <CAFdLW6mQwYmmObRyDmLuff7bn=inwDVBwW4nOdfnKjh7b-8tSw@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Make sure it's not caught under the edge of the dash.

It's an easy slide with maybe a bit of resistance at the beginning as there
are a couple of spring tabs at the ends that are usually broken off.

Lots of engaged area on the slide to bind up if someone spilled Coke on it.

On Wed, Sep 25, 2019 at 6:22 PM Dan N <dn92610@gmail.com> wrote:

> thanks Jim,
>
> it's original, supposedly never been touch at...I will try that... if it
> breaks JB Weld to the rescue or looking at the ads....
>
> On Wed, Sep 25, 2019 at 2:49 PM Jim. Felder <jim.felder@gmail.com> wrote:
>
> > Unless yours has been modified with screws or such, grab each side and
> > rock side to side gently while pulling straight back.
> >
> > Jim
> >
> >
> > On Sep 25, 2019 at 4:46 PM, <Dan N <dn92610@gmail.com>> wrote:
> >
> > hi all,
> >
> > could anyone please help me on how to remove the front heater cover (the
> > large plastic in front of the shifter)... I remember reading somewhere
> long
> > ago, just pull straight out but mine seems stuck... - is there clips of
> > lift?, pull up and out or just straight out?
> >
> > many thanks
> >
> > dan
> >
> >
>