Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (October 2019, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 20 Oct 2019 09:59:30 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Hose from pressure cap on expansion tank to coolant overflow
              tank
Comments: To: "John H. Lauterbach" <john@jhl.mgacoxmail.com>
In-Reply-To:  <e7678a536c725486f62cca70d8e7c6901100c561.camel@jhl.mgacoxmail.com>
Content-Type: text/plain; charset="UTF-8"

I just kook at that hose on one of my van (VW Audi logo) 443121107 APX07x2.5x5000 on my other van ArmorMark 50060 5/16" (7.9mm) -> I think this is from Autozone

On Sun, Oct 20, 2019 at 6:13 AM John H. Lauterbach <john@jhl.mgacoxmail.com> wrote:

> Thank you, Gene. I would appreciate it if you would post the Gates Part > Number > for the hose you are using. I was able to find anything like what the > stock > hose is on the Gates website. > John > On Thu, 2019-10-17 at 18:53 -0700, Gene P wrote: > > Probably not at all chains but at a local auto supply I gotGates 5/16 > (8.0mm) > > premium heater hose, made in USA.It’s straight heater hose, buy what you > need > > by the foot. > > From: John H. LauterbachSent: Thursday, October 17, 2019 6:07 PMTo: > > vanagon@GERRY.VANAGON.COM > > Subject: Re: Hose from pressure cap on expansion tank to coolant > overflow tank > > Thank you, Dan. I went to the local AutoZone and O'Reilly's and neither > > storehad anything close except for high-pressure fuel lines. That is > why I > > posted tothe list. John > > On Thu, 2019-10-17 at 17:44 -0700, Dan N wrote: > > > cut a short section of the hose and bring it to any auto-parts store > > > andtheywill match it.On Thu, Oct 17, 2019 at 4:15 PM John H. > Lauterbach < > > > john@jhl.mgacoxmail.com>wrote: > > > > What are the correct dimensions (ID, OD, Length) for subject hose, > > > > andwheredoI get it? I have seen some hoses on list vendor websites > > > > thatlooksimilar, butnot the same.If one cannot get a direct > replacement > > > > hose, what are the alternatives?Thank you,John >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.