After disconnecting and reconnecting the cable to the instrument pod the temp gauge is back to working as it did previously. Thanks for the suggestions guys! -Mark On Thu, Oct 17, 2019 at 4:30 PM Mark McCulley <markmcculley@gmail.com> wrote: > Today while on a 150 mile drive back home I noticed the needle on the temp > gauge was only half way between the low mark and the LED. Normally when the > van is warmed up the needle sits at the lower edge of the LED. Everything > else seems to be normal. > > Could the thermostat be stuck open? > > -Mark > ‘87 Syncro |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.