I just noticed that our '87 is showing what looks like excessive negative camber on the left rear. The right looks normal while the left appears to be tilted in further at the top. I put a straightedge level across the left wheel arch at the top of the wheel and measured 3/4" from lip of the rim to the straightedge, while measuring the same way on the right gives 1/4", so about a half-inch difference from one side to the other, about what it looks like when viewing the van from behind. I usually keep a pretty close eye on chassis stuff; checking tire pressures regularly and checking the tread for wear and FOD (good old Air Force term for Foreign Objects/Debris) so I feel like I'd have noticed the camber thing before now. Tires are fairly recent with low miles being driven so there's no tire wear to indicate a camber problem; it's just something I spotted. I'll get under there to see about adjusting but is there anything specific I should be looking our for? What would cause the camber to just go out of whack? Thanks! Stephen |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.