Date:         Fri, 18 Oct 2019 18:24:34 -0400
Reply-To:     Stephen Grisanti <bike2vcu@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen Grisanti <bike2vcu@YAHOO.COM>
Subject:      Re: help me add a light over sink
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
In-Reply-To:  <BY5PR10MB4322E99680357F5777BD9AA1A06C0@BY5PR10MB4322.namprd10.prod.outlook.com>
Content-Type: text/plain; charset=us-ascii

Back before LEDs were a thing I replaced my kitchen light with a fluorescent and added another over the low cabinets, both on the curtain rail. Just wired the second to the first with no additional fusing. 

Stephen

Mobile

> On Oct 18, 2019, at 5:50 PM, Dennis Haynes <d23haynes57@HOTMAIL.COM> wrote:
> 
> The wiring to the light in the kitchen now is already fuse protected. No problem tapping that wire for another lamp, especially a small LED one. 
> 
> Dennis
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Spencer Allen
> Sent: Friday, October 18, 2019 10:24 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: help me add a light over sink
> 
> I want to add a small led light over the sink but don't know where to start with the wiring. Can I splice into the existing house light and add an inline fuse? It's for my 85 Westy and I don't have a second battery for the coach area. Any BTDT with photos would be much apprciated.
> Spencer