I measure the front windshield wiper arm (from the tip to the center)... both sides are 17.5" then I measure the Rear hatch wiper arm... it's 18.75" so... somehow someone swap the rear with one of the front... :-) dan On Sun, Feb 2, 2020 at 11:15 AM Neil N <musomuso@gmail.com> wrote: > Do you think there's differences between arms for various model years > or between OE and aftermarket? Using two different sized arms on a > Vanagon would not be an issue? > > I see a part number on one arm, not sure if other has same. > > Thanks for posting that. I'd downsizing on spare parts so 2 or 3 out > of 4 spare wiper arms will get recycled. > > Neil. > > On 2/2/20, Alistair Bell <albell@shaw.ca> wrote: > > > .... Taking apart a spare pair of wiper arms for > > blasting and powdercoat, noticed they are different lengths and different > > lengths between bends. .... > > > > Pic > > > > https://shufti.blog/ > > > > Alistair > > > -- > Neil n > > VE7TBN > > 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt > > 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8 > > VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.