Ken's points are well taken! I found my body/paint guy from a recommendation by the local Auto body paint supply store. GNE Paint & Supplies in Michigan. With older, rust buckets, we were able to keep the rust away for 15+ years thanks to a highly skilled individual who used epoxy-primer to seal out O2. https://garage.eastwood.com/tech-articles/epoxy-primer/ Good luck on your project! Jack R. 84 Westy, Wolfie -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Markus Benne Sent: Tuesday, March 24, 2020 8:43 AM To: vanagon@GERRY.VANAGON.COM Subject: Body Work List?
I'm about to try my hand at body work on a very crusty bus. Is there a dedicated group for Vanagon body work? Thanks for any tips. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.