I’ll have to set up for vid on the injector pulsing Test. So far I just know that gas comes out of the one tested. Bad ecu, I’m not liking that but options narrowing. Thanks again, Ab > On Mar 29, 2020, at 2:06 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote: > > ECU can also fail causing no spark. Are injectors pulsing while cranking? If injectors are pulsing while engine is cranking than hall sensor likely good. If pulsing but still no spark bad coil or ECU. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell > Sent: Sunday, March 29, 2020 5:00 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Engine died, Update ign > > Bentley ecu harness tests continue, 24.61 > > Test 2, wire to coil terminal 1, good > Test 10, wires to hall sensor connector, good > > Swapped in an old coil, no change. > > And reiterate , couldn’t see spark on plug when cranking ( videoed) > > I think I’ll do some machine work now , and then head back home to see if I do have spare dizzy. > > Ab |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.