Forget that, shamefaced, read PinOut incorrectly Test one on 24.61 passed > On Mar 29, 2020, at 12:25 PM, Alistair Bell <albell@shaw.ca> wrote: > > First steps in Bentley 24.61 > > Ecu plug, Voltage. 13 and 14 , battery voltage ... good > 14 and 19, no voltage. > > I understand that 19 is ground path to stud on block > > Tested continuity to chassis on that pin 19, nothing > > Checked as well as I could with jumpers, and ground off block, ring terminal, to pin 19, no continuity > > I’ll cut back the brown wire in compartment and add new ring > > Alistair |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.