Date: Sat, 4 Apr 2020 16:52:31 -0700
Reply-To: David McNeely <davmcneely40@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: David McNeely <davmcneely40@GMAIL.COM>
Subject: Re: Richards fog light query, inside look
In-Reply-To: <579645565.548164.1586040926013@mail.yahoo.com>
Content-Type: text/plain; charset="UTF-8"
Richard, that is really neat. I have heard of such a contraption before.
What I wonder, given that it operates while driving (hot shower when you
arrive at camp, right?), what keeps the water from sloshing in the pot,
even over topping as it sloshes? After all, anything in motion, tends to
stay in motion until an arresting force stops it. Any acceleration or
deceleration would tend to cause sloshing, it seems to me. Or is the pot
sealed, thus keeping the water from over topping the pot?
mcneely
On Sat, Apr 4, 2020 at 3:58 PM Richard Koerner <rjkinpb@sbcglobal.net>
wrote:
> Thanks Alistair for posting revealing pics on the interior of that Rear
> Window Defogger switch. It may be "possible" to install a modern tiny LED
> to replace the incandescent bulb and light pipe combo, but I've kind of
> decided against it (for present project purposes, I can always add later).
> I just don't want to add another failure point mostly. For my project, the
> switch will mostly be actuated in daylight hours making it a little hard to
> see anyway.
>
> Oh...what is the "project"? I have this hot shower rig in my Vanagon; I
> utilize the rear heater hoses lines (heater long gone) to feed a 1/4" x 20
> Feet Copper Coil. This coil sits inside of a 5 gallon (20 quart)
> thick-walled aluminum stockpot from Costco. Previously, I would run back
> to rear of Van and open ball valve; hot coolant goes inside copper tubing
> heating up water; BBQ thermometer with wires up to cockpit monitors water
> temperature. Alarm signals at 122 °F. I then pull off highway, run to
> back of Van again, and close ball valve. Super simple. But sometimes,
> enough times over the years that this running back and forth to open and
> close the ball valve got to be a pain. Solution? Motorized ball-valve,
> with auto-close when power shuts off. And so the whole purpose of
> utilizing the spare rear defogger switch is to open and close the
> ball-valve. I'm almost done with the project; last step is to install
> switch in instrument cluster, add an-inline fuse, and wire it up. Should
> be cool. I mean....hot!
> Rich
> San Diego
>
> On Saturday, April 4, 2020, 10:57:34 AM PDT, Alistair Bell <
> albell@shaw.ca> wrote:
>
> Took apart a spare switch I had. Posted pics
>
> https://shufti.blog/2020/04/04/vanagon-inside-the-rear-window-defogger-switch/
>
> Just to further the discussion :-)
>
> Alistair
>
|