I have and it does :-) Ab > On Apr 9, 2020, at 10:58 AM, David Beierl <dbeierl@gmail.com> wrote: > > > The only way to get an accurate voltage reading is to use non load bearing wires directly to the battery posts. > > Yrs, > d > > On Thu, Apr 9, 2020 at 1:56 PM David Beierl <dbeierl@gmail.com> wrote: >>> - the voltage drops as electrical loads applied. in winter, headlights on, heater fan on, re fogger on, wipers on, the voltage can drop ( as measured on fuse panel) to the high 13s. >> >> The whole point of the regulator is to *not* drop under load. YOu're seeing the voltage drop in the panel feed. >> >> Yrs, >> d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.