Date:         Fri, 10 Apr 2020 12:07:21 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Electrical connection prep.
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <7CFCD5AA-77A0-47D5-8143-61345CABEC3C@shaw.ca>
Content-Type: text/plain; charset="UTF-8"

En route to BBTB, dirty contacts at distributor hall caused stalling
engine cut out issues. I cleaned those contacts at the Auto Zone
parking lot with fine emery and contact cleaner.

At BBTB I discussed the issue with a well respected Vanagon repair
tech who then mentioned a high quality $$$ cleaner he liked to use on
crucial connectors. IIRC, it was stabilant-22. IOW, using that
would've required less fussy work and might do a better job.

Neil.

On 4/10/20, Alistair Bell <albell@shaw.ca> wrote:

> As an aside, I’ve always wanted to have a wee bottle of that stabilant-22,
> contact enhancer. I think Vw even mentions it somewhere in a digifant tech
> bulletin. Remember when it also was touted by those audiophile types? :-)
>


-- 
Neil n

VE7TBN

1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt

1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8

VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>