Really doesn't matter here. Just grease enough to keep water out. The outer part of the tube has a roller bearing if I remember right and the inner is just a bushing. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Stan Shapiro Sent: Wednesday, April 15, 2020 6:35 PM To: vanagon@GERRY.VANAGON.COM Subject: grease beam I am going to grease my front beam/torsion bars with a general all purpose Lithium grease. Should I use a product that has Moly, too?
77 Baywindow.
Thanks Ss This whole quarantine time is giving me time to learn some basic repairs that I should have been doing by myself for a long, long time. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.