Hello everyone, I pulled the panels out on the passenger side above the rear wheel well and of course there is seam rust in there on the vertical seam and along the wheel well. I hit it with ospho. Not that happy with the results I’m gonna get my dreamer in there and sand as much of the rust off I can get at and treat it again. I was thinking one more coat of ospho before I paint it with a rust encapsulater but does anyone have any other suggestions how to slow the inevitable? Should I use an oil to instead? Thanks for your suggestions. Peace tom |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.