if you have the Idle control valve, the one that sit on top near the breather tower... remove it and spray a lot of carb cleanr in it and let it sit a while... On Wed, Apr 22, 2020 at 2:13 PM Chris S <szpejankowski@gmail.com> wrote: > When engine is warm I’m able to adjust idle with idle adjustment screw. I > will check the o-ring, though. > > Chris. > > Wysłane z iPhone'a > > > Wiadomość napisana przez alex@mevay.org w dniu 22.04.2020, o godz. > 12:20: > > > > Hi Chris, > > > > I'm running the same setup as you. > > > > Sorry if this is obvious, but I didn't see you mention it. Have you > > checked the idle adjustment (bypass screw on throttle body)? I recall > > having similar symptoms when mine was set too low (screw damaged). > > > > Alex > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.