Date:         Thu, 23 Apr 2020 09:07:17 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: No idle when engine cold
Comments: To: Dennis Haynes <d23haynes57@HOTMAIL.COM>
In-Reply-To:  <SN6PR10MB289472CE0BC12670D432B7B6A0D20@SN6PR10MB2894.namprd10.prod.outlook.com>
Content-Type: text/plain; charset=utf-8

                Hey Dennis

        Not good to hear that You were sick but Very Good to hear that You have recovered ~

Hope for Your sake that it was CV-19 as You will now have better chance of immunity when

it comes around again ~

        As for Alexs Idle Issue > Any guess on what it might be, I have 2 Friends whose Vans

are showing similar symptoms & so far the Culprit is being Illusive ~

                                                                ORR ~ DeanB

On 22 Apr , 2020, at 3:41 PM, Dennis Haynes wrote:

> Why would one want to that? There shouldn't be much of anything in it and if there is that is a sign that you have an engine problem. 
> 
> Dennis
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of Dan N
> Sent: Wednesday, April 22, 2020 5:19 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: No idle when engine cold
> 
> if you have the Idle control valve, the one that sit on top near the breather tower... remove it and spray a lot of carb cleanr in it and let it sit a while...
> 
> On Wed, Apr 22, 2020 at 2:13 PM Chris S <szpejankowski@gmail.com> wrote:
> 
>> When engine is warm I’m able to adjust idle with idle adjustment 
>> screw. I will check the o-ring, though.
>> 
>> Chris.
>> 
>> Wysłane z iPhone'a
>> 
>>> Wiadomość napisana przez alex@mevay.org w dniu 22.04.2020, o godz.
>> 12:20:
>>> 
>>> Hi Chris,
>>> 
>>> I'm running the same setup as you.
>>> 
>>> Sorry if this is obvious, but I didn't see you mention it.  Have you 

>>> checked the idle adjustment (bypass screw on throttle body)?  I 
>>> recall having similar symptoms when mine was set too low (screw damaged).
>>> 
>>> Alex
>>