Hi Richard, On the 2WD Vanagon, the wheel bearings reside in the rotor assembly, and it is somewhat easy to change. https://www.youtube.com/watch?v=OTIt76p57m0 Jack -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Richard Smith (Smirby) Sent: Tuesday, May 5, 2020 9:29 PM To: vanagon@GERRY.VANAGON.COM Subject: Wheel bearings I have been messing around with the wheels, changing the stock 14" steel wheels to larger alloy wheels. One of my attempts involved putting spacers on the front and I had to take the dust caps off the hubs (very snug fit on those spacers). In doing that I noticed that while the drivers side had nice red grease oozing out, the passenger side was black and more runny looking. Am I correct to assume that this is a bad sign and front wheel bearings are in my future? I did spin that wheel and it was more or less exactly like the other front wheel, and did not rumble or grind. Advice most appreciated. Richard Smith smith@sfu.ca= |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.