Date:         Wed, 6 May 2020 16:33:18 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: Vanagon + LED Brake Lights + AudioVox CCS-100
Comments: To: Dug Smith <dug@DUGBERT.COM>
In-Reply-To:  <a5d97c4a-8930-2630-41ab-b812de69e41a@dugbert.com>
Content-Type: text/plain; charset=us-ascii

                Dennis & Dug or WeEMHTA

        Very interesting ~ So is there a way to add a resistance that will make the CC happy but will not degrade the 

LED Output ~



On 6 May , 2020, at 3:44 PM, Dug Smith wrote:

> Because the cruise control uses the brake light to trigger disengaging, it checks the brake light circuit is working before it'll engage, too :o(
> 
> toodle pip,
> -- 
>       Dug Smith         | Terry Pratchett: It's almost
> (mailto:dug@dugbert.com) |  impossible to ride a rock and roll
> (http://www.dugbert.com) |  motorbike and stay on for three verses.
> 
> On 5/6/2020 1:51 PM, OlRivrRat wrote:
>>                 To the Vanagon Electrics Wizards
>>         I would not have been surprised to discover that My CC Would Not DisEngage
>> with Brake Apply after LED install but what I am encountering is that the CC Will Not
>> Engage now that I have LED Brake Lights > I'm Puzzled ~
>> Again  >>  AudioVox CCS-100 + Speedo Mounted VSS + Dakota Digi SGI5 ~
>>                                                         ORR ~ DeanB