On 6 May , 2020, at 5:26 PM, Dug Smith wrote: > The purple cruise control wire can't sense ground through an LED. With that as My guide + a Diagram from the Orig CCS-100 Install Man' I decided it was time to do something I have often (any time CC doesn't wan't to Engage) thought about doing which is to have a Brake Light "PilotLight" that can be seen by Me/Driver so as to know if the Brake Lights are On when they are supposed to be Off ~ I wired a single bulb from the Ground Side of My BrakeLight switch to Ground & mounted it up under Dash so now when Brakes are applied the FootWell Glows & when Brakes are Off CC Works As It Should ~ Thanks a Bunch to Dug & Dennis ~ Next Quiz > While DVMing to be sure I new which side of My BrakeLightSwitch was GroundSide I got .22VDC between Ground & Ground Leg on Switch ~ Is this an issue that I need to address & if Yes, Any Ideas on where to start looking ~ Might have been .022VDC > Don't Remember > Can recheck if it is significant info ~ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.