Date: Fri, 8 May 2020 00:51:25 -0700
Reply-To: Mark Belanger <mbelanger@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Mark Belanger <mbelanger@GMAIL.COM>
Subject: Re: Vanagon + LED Brake Lights + AudioVox CCS-100
In-Reply-To: <6cf1c88a-ad9e-a633-26a2-467d5cd9f895@dugbert.com>
Content-Type: text/plain; charset="UTF-8"
Is this issue specific to third-party CC units or can I expect this fun
when I install the accessory (aka 3rd) brake light kit?
Gracias,
MB
On Wed, May 6, 2020 at 4:27 PM Dug Smith <dug@dugbert.com> wrote:
>
> https://www.st-owners.com/forums/threads/st1300-audiovox-ccs-100-troubleshooting.119551/
>
> Brake Wire Connection:
> The purple wire from the cruise control servo must be connected to the
> positive side of your brake switch. Normally the rear brake switch has
> the easiest access. Connect the purple cruise control wire to the side
> of the brake switch that usually has 0 Volts DC but +12 Volts DC when
> you step on the brakes. You can also connect the purple cruise control
> wire to your taillight brake wire but you'll also need a SPDT relay in
> the circuit. If you have LED taillights or have even added accessory LED
> brake lights you need to use a relay. The purple cruise control wire
> can't sense ground through an LED.
>
> There are some links there to workarounds :o)
>
> On 5/6/2020 3:33 PM, OlRivrRat wrote:
> > Dennis & Dug or WeEMHTA
> >
> > Very interesting ~ So is there a way to add a resistance that will
> make the CC happy but will not degrade the
> >
> > LED Output ~
> >
> >
> >
> > On 6 May , 2020, at 3:44 PM, Dug Smith wrote:
> >
> >> Because the cruise control uses the brake light to trigger disengaging,
> it checks the brake light circuit is working before it'll engage, too :o(
> >>
> >> toodle pip,
> >> --
> >> Dug Smith | Terry Pratchett: It's almost
> >> (mailto:dug@dugbert.com) | impossible to ride a rock and roll
> >> (http://www.dugbert.com) | motorbike and stay on for three verses.
> >>
> >> On 5/6/2020 1:51 PM, OlRivrRat wrote:
> >>> To the Vanagon Electrics Wizards
> >>> I would not have been surprised to discover that My CC Would
> Not DisEngage
> >>> with Brake Apply after LED install but what I am encountering is that
> the CC Will Not
> >>> Engage now that I have LED Brake Lights > I'm Puzzled ~
> >>> Again >> AudioVox CCS-100 + Speedo Mounted VSS + Dakota Digi SGI5 ~
> >>> ORR ~ DeanB
> >
>
--
________________________________________________________________________
Mark Belanger - mbelanger@gmail.com
|