Date:         Sun, 10 May 2020 11:04:49 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: [Syncro] wheel offset question, syncro
Comments: To: Syncro@groups.io
In-Reply-To:  <CAKbau539z+f_afysg_ugtZ4XUmPOE_Xuv4TBOsqjHg8jkf=c=Q@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Just to add maybe an obvious point when choosing the wheels. Depending on wheel thickness at the lug holes, and of course if adding spacers, you may have to add longer wheel studs. The rears are easy to do, press in and out of stub axle. But the front hub on Syncro is more a pain to remove and may give you pause to reconsider wheel choice.


Alistair 

> On May 10, 2020, at 9:34 AM, Mark McCulley <markmcculley@gmail.com> wrote:

> 
> 
> Is ET45 offset OK on a 16x7 wheel for a syncro?
> 
> -Mark
> _._,_._,_
> Groups.io Links:
> You receive all messages sent to this group.
> 
> View/Reply Online (#56582) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
> 
> If you would like to modify your subscription settings (including unsubscribing), visit: https://groups.io/g/Syncro
> Rude or offensive language is not allowed in the Syncro group. Please try your best to resolve differences privately and keep them off the group email distribution.
> Your Subscription | Contact Group Owner | Unsubscribe [albell@shaw.ca]
> _._,_._,_