> > I would, however, like to confirm that the idle system is working as > intended.
No hum, no idle control. It hums because it's driven by a 12V ~250 Hz PWM signal from the ICU. The relay you refer to is the ECU relay that powers the ECU. It's controlled by ign sw power to the coil (except in early '86). ECU in turn controls the fuel pump relay. Depending on year, the ICU uses ECU power or fuel pump power.
Yrs, d > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.