Steven, I’ll add another to the good list if things to check. Make sure your timing is set right. Good luck Alistair > On May 16, 2020, at 9:21 PM, Steven Mills <lefthanddrive123@gmail.com> wrote: > > Will try to be brief, but lots to the story. Have 87 Westy with idle issues. New items include engine bay wire loom, TPS and GW throttle body. Idle is low and sometimes erratic. Idle control valve does not vibrate/hum but will open/close on bench test. idle Control Module and valve has been changed out with spares I have to no avail. All grounds have been cleaned and secured. So, my question centers on whether or not the ECU can partially function but still be dysfunctional as to the idle. Any thoughts/ideas would be appreciated. > > Sent from my iPad |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.