Well, if you replace the 88/89 diagram page that has the 2 fuel injection relays on it with the same page from the 90/91 diagram it corrects the 3 mistakes I am aware of. The diagrams have large page numbers at the bottom and a smaller drawing number inside a rectangle near the bottom . Drawing number 97-2916 should be REPLACED with drawing number 97-8149 In my Bentley- drawing number 97-2916 is found on page 97-124 - (88,89 diagrams) drawing number 97-8149 is found on page 97-206 - (from 90 diagrams) So yes, this means this one 90 diagram page is right for 88/89 but unfortunately very wrong for 90 and later. If your manual stops at 89 then you likely don't have the correct 90 page available to use.
Mark
Pat Spragge wrote: > Mark, > > Thanks for your information... > Could you share what the errors are? I have the ‘89 Bentley and an ‘89 Westfalia. > Thx > Patrick > >> On May 17, 2020, at 11:13 AM, vw_van_fan_Mark <madvws@cox.net> wrote: >> >> (note: the wiring diagrams have some errors in the fuel injection relay >> wiring section for 88/89 and 90/91 diagrams, also the changes were not >> at exact model year breaks) > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.