Date:         Wed, 17 Jun 2020 08:45:12 -0700
Reply-To:     Edward Barger <edvbarger@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward Barger <edvbarger@YAHOO.COM>
Subject:      Thanks Tail lights work correctly and now on to
Content-Type: text/plain; charset=utf-8

Thanks again to all ……Dennis was spot on   

I spliced in new wires for the 5 damaged ones  covered the crimp spices with shrink tube   put the whole bundle in a plastic tube 

sealed either end with a large shrink tube   Secured the tube to the sheet metal wall to the rear to keep it up away from the heat of the muffler etc

Now need to remove the square drivers side head light lens and remove the moisture  did this a few years ago and now is back 

 Looks like I need to get a better seal to keep moisture out 

And to find the ground wire for the head lights they are rather weak   rather yellow 

and instal the new horn 

etc etc  and it goes on and on 

thanks 

ed



Edward V Barger
edvbarger@yahoo.com 
310 922 6251
“Age is an issue of mind over matter …
If you don’t mind it doesn’t  matter "
Mark Twain