Hoping some one out there has installed an air horn like the one from Go Westy https://www.gowesty.com/product/-/23471/air-horn-kit-?v=
I do not have the Go Westy kit Just the air horn and a relay Using the GW instructions I located the wires behind the fuse block AND
Using the Brown wire with Blue tracer Which by my reckoning should be the one that will be activated when the horn ring is activated I get no voltage off this wire when the horn ring is activated
The Black wire yellow tracer is the ground When I use the fluke meter on it to ground do get continuity
I have looked carefully at the back of the fuse block and can locate only this one Brown wire with Blue tracer The original horn does work when the horn ring is activated What am I missing here it looks so simple
ed
Edward V Barger edvbarger@mac.com 310 922 6251 “ Age is an issue of mind over matter … If you don’t mind it doesn’t matter " Mark Twain |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.