Great suggestion, thanks. I just sent a message to the local VW dealer to see if they can get them. If they cannot then I think your idea is a good approach while I wait to see if Van Cafe gets them in stock. I tried using silicone but that was useless. ________________________________ From: Dan N <dn92610@gmail.com> Sent: Wednesday, July 8, 2020 10:48 AM To: David Boan <dboan@outlook.com> Cc: Vanagon Mailing List <vanagon@gerry.vanagon.com> Subject: Re: washers those washers are fiber and break easily when you take them out. I made one with a piece of rubber from the bicycle inner tube. if you don't want to wait, cut a square piece of rubber, make a hole to fit, put it on and round it off with the tip of an X-acto knife. On Wed, Jul 8, 2020 at 5:38 AM David Boan <dboan@outlook.com<mailto:dboan@outlook.com>> wrote: I just replaced the trim around the driver and passenger windows, including the vent windows. When I took the vent window glass out on one side two of the pressure washers crumbled. The only supplier I have found is Van Cafe, and they are out of stock. Does anyone know of another source or an alternative to using the pressure washers? Thanks Dave B Boise |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.