If you look at the transmission mount it is basically a round mount with a flat metal plate welded to it. I need the diameter of the round mount part. Ken On Wed, Jul 29, 2020 at 2:58 PM Jim. Felder <jim.felder@gmail.com> wrote: > OK, which round part exactly. My van was sent to a shop to adjust the > linkage, where it is now. The mechanics there will have to do the > measuring, so I need to know exactly what they need to be measuring. thanks > ken, > > Jim > > On Wed, Jul 29, 2020 at 1:49 PM kenneth wilford (Van-Again) < > kenwilfy@comcast.net> wrote: > > > I have the powerflex one that you have to remove your round mount and > > reuse the metal housing. Will that work? Just need to confirm the > > diameter of the round part. > > > > Ken > > > > On Wed, Jul 29, 2020 at 2:44 PM Jim. Felder <jim.felder@gmail.com> > wrote: > > > >> Found out mine is broken. Does anyone have, new or used. For a DX > >> transmission. > >> > >> Thanks, > >> > >> Jim > >> > > > > > > -- > > Thanks, > > Ken Wilford > > John 3:16 > > www.vanagain.com > > >
-- Thanks, Ken Wilford John 3:16 www.vanagain.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.