Date:         Wed, 29 Jul 2020 15:08:24 -0400
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: ISO front five speed transmission mount
Comments: To: "Jim. Felder" <jim.felder@gmail.com>
In-Reply-To:  <CAFnDXk1TiEC8mKc6LZL3AcuCa7H4wP11RDrJSDu--bxomEnHJA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

If you look at the transmission mount it is basically a round mount with a
flat metal plate welded to it.  I need the diameter of the round mount part.

Ken

On Wed, Jul 29, 2020 at 2:58 PM Jim. Felder <jim.felder@gmail.com> wrote:

> OK, which round part exactly. My van was sent to a shop to adjust the
> linkage, where it is now. The mechanics there will have to do the
> measuring, so I need to know exactly what they need to be measuring. thanks
> ken,
>
> Jim
>
> On Wed, Jul 29, 2020 at 1:49 PM kenneth wilford (Van-Again) <
> kenwilfy@comcast.net> wrote:
>
> > I have the powerflex one that you have to remove your round mount and
> > reuse the metal housing.  Will that work?  Just need to confirm the
> > diameter of the round part.
> >
> > Ken
> >
> > On Wed, Jul 29, 2020 at 2:44 PM Jim. Felder <jim.felder@gmail.com>
> wrote:
> >
> >> Found out mine is broken. Does anyone have, new or used. For a DX
> >> transmission.
> >>
> >> Thanks,
> >>
> >> Jim
> >>
> >
> >
> > --
> > Thanks,
> > Ken Wilford
> > John 3:16
> > www.vanagain.com
> >
>


--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com