Date: Mon, 31 Aug 2020 16:22:35 -0700
Reply-To: Kenneth O'Connor <kenneth.oconnor@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Kenneth O'Connor <kenneth.oconnor@GMAIL.COM>
Subject: Re: Syncro vs 2WD dipstick
In-Reply-To: <CY4PR0801MB3731AF6135C5752F28A20601A0780@CY4PR0801MB3731.namprd08.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"
Hello Everyone,
I have a 1986 SYncro that I've had for about three years. The dipstick has
read paint on it. This implies that it is a dipstick for a 2WD. Is there a
way I can be sure that it has the 2WD dipstick tube? I have enclosed a link
to a photo on DropBox of the dipstick pull handle looking in through the
license plate door. Does this look lower than expected?
https://www.dropbox.com/s/2j0x9vud9l68ki3/Image%20from%20iOS%20%287%29.jpg?dl=0
Thank You,
Ken
(941) 323-4710
On Mon, Jul 20, 2020 at 7:39 PM Dennis Haynes <d23haynes57@hotmail.com>
wrote:
> The engine in a Syncro sits lower in the body. As such the dipstick tube
> is longer to sit higher in front of the license plate door. This also
> requires a longer dipstick for the longer tube. The support bracket along
> with the oil fill pipe is also different. The muffler brackets, and rear
> engine carrier are different also. A part of the Syncro package the rear
> pulley gets a sand seal assembly, bell housing gets flap check at the
> bottom between the engine and transmission, the thermostat housing was
> aluminum. The transmissions, and bel housing get tube venting to get above
> the water line, etc.
>
> Dennis
>
>
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> From: Dan N<mailto:dn92610@GMAIL.COM>
> Sent: Monday, July 20, 2020 1:20 PM
> To: vanagon@GERRY.VANAGON.COM<mailto:vanagon@gerry.vanagon.com>
> Subject: Syncro vs 2WD dipstick
>
> hi all,
>
> Does anyone know why there's a difference between Syncro dipstick and 2WD
> dipstick both using 2.1 wbx engines?
>
> https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.thesamba.com%2Fvw%2Fforum%2Falbum_page.php%3Fpic_id%3D1686306&data=02%7C01%7C%7Cce372e2712814a305c9508d82cd13735%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637308624365497034&sdata=5SwzYIW1scXdD%2FTo%2FmU36iTl1Kj9He13RVLvd0xyYck%3D&reserved=0
>
> - Syncro dipstick is green and it has 22mm (.86") between high and low
> - The 2WD dipstick is red and it has 29mm (1.14") between high and low.
>
> could it be because they to want to warn the driver of low in oil sooner on
> the Syncro? or the engine in a Syncro sits differently?
>
> thanks
>
> dan
>
|